Nut Strip
6145570
(NSN) National Stock Number
5310-01-314-5508
Federal Supply Classification
5310 Nuts and Washers
Item Name Code
16009
Schedule B Code
7318160000
Summary
3b thread class, right-hand thread direction, 0.470 inches minimum and 0.480 inches maximum material thickness, strip nut style, 5.035 inches nominal nut length, 1.120 inches minimum and 1.130 inches maximum nut width
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| A | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | KZ |
Identification
A fastening device of rigid or semirigid material of various shapes and lengths having two or more apertures with lugs or prongs; threaded holes; or nuts. The apertures, threaded holes or nuts may be of any predetermined spacing.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 16009 | A021A0 | - | 1 |
Specifications
Thread Class
3b
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Material Thickness
0.470 inches minimum and 0.480 inches maximum
Details
A measurement of the smallest dimension of the material,in distinction from length or width.Nut Style
strip
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.Nut Length
5.035 inches nominal
Details
A measurement of the longest dimension of the nut,in distinction from width.Nut Width
1.120 inches minimum and 1.130 inches maximum
Details
None.Drilled Hole Diameter
0.3125 inches minimum and 0.3130 inches maximum
Details
The length of a straight line which passes through the center of a drilled hole,and terminates at the circumference.Hole Type And Quantity
2 drilled
Details
Indicates the type and number of holes provided.Thread Series
unjf
Details
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.Aperture Quantity
4
Details
The number of apertures included.Thread Quantity Per Inch
28
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Nominal Thread Size
0.250 inches
Details
A designation that is used for the purpose of general identification of the thread.Special Features
thd holes ctr 3.380 in. apart; drilled holes ctr 1.375 in. apart; 15.0 deg taper one end,one edge; 30.0 deg cut corner,opposite edge; corners rounded; 10.440 in. in,10.560 in. max radius,one side
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Material
steel comp 630 overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
ams 5643,cond h1025 assn std single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
passivate overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
qq-p-35,type 2 fed spec single treatment response overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Test Data Document
96906-mil-std-6866 standard (includes industry or association standards, individual manufactureer standards, etc.).
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 48950 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 573 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
FAQs
Frequently asked questions for NSN 5310-01-314-5508
What is the NIIN of the NSN 5310-01-314-5508?
The National Item Identification Number (NIIN) of the NSN 5310-01-314-5508 is 01-314-5508
When the NSN 5310-01-314-5508 was assigned to the Federal Catalog?
It was assigned 34 years ago, on Thu, Feb 1, 1990
Does the NSN 5310-01-314-5508 contain any precious metals?
Does not contain precious metal
Does the NSN 5310-01-314-5508 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.