Hexagon Slotted Plain Nut
2578697-001A
(NSN) National Stock Number
5310-00-432-3497
Federal Supply Classification
5310 Nuts and Washers
Item Name Code
01859
Schedule B Code
7616995195
Summary
3b thread class, right-hand thread direction, 1.910 inches nominal nut counterbore diameter, slotted, hexagon nut style, 0.531 inches nominal nut height, 0.030 inches nominal nut nut counterbore depth
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | C |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 1 | AC | - | KE |
Identification
A nut having a flat bearing surface and 6 flat sides with slots in its upper portion. It is designed to provide positive locking when used with a solid or split (cotter) pin. Excludes:nut (1), plain, castellated, hexagon.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 01859 | A021A0 | 1 | 1 |
Specifications
Thread Class
3b
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Counterbore Diameter
1.910 inches nominal nut
Details
The length of a straight line which passes through the center of a counterbored portion of a hole,and terminates at the circumference.Nut Style
slotted, hexagon
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.Nut Height
0.531 inches nominal
Details
None.Nut Counterbore Depth
0.030 inches nominal nut
Details
The measurement of the enlarged portion adjacent to the threaded portion of a nut,in distinction from height.Width Across Flats
2.304 inches minimum and 2.314 inches maximum
Details
The shortest straight line between flats,perpendicular to the height.Thread Series
unj
Details
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.Thread Quantity Per Inch
12
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Nominal Thread Size
1.750 inches
Details
A designation that is used for the purpose of general identification of the thread.Countersink Angle
110.0 degrees nominal nut
Details
The included angle of the countersink.Bearing Surface Type
chamfered
Details
Indicates the type of bearing surface.Bearing Surface Finish
125.0 microinches
Details
Designates the specific roughness rating of the bearing surface,representing the arithmetic average deviation of the surface from the meanline in profile.Special Features
shot peened
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Material
aluminum alloy 7075 overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
qq-a-200/11,t73 fed spec single material response overall or qq-a-225/9,t73 fed spec single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
anodize overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
cp-0410-,fscm 06848 mfr ref single treatment response overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Test Data Document
81349-mil-i-6866 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 2578697-001A | 55284 | 2 | - | 3 | 2 | - | KE |
| 2578697-001A | 17576 | 2 | - | 5 | 9 | - | KE |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 05680 | - | Q | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
HONEYWELL INTERNATIONAL INC DIV AEROSPACE-SOUTH BEND (BENDIX DR)
CAGE: 06848
SOUTH BEND
, IN
, 46628-1373
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5310-00-432-3497
What is the NIIN of the NSN 5310-00-432-3497?
The National Item Identification Number (NIIN) of the NSN 5310-00-432-3497 is 00-432-3497
When the NSN 5310-00-432-3497 was assigned to the Federal Catalog?
It was assigned 53 years ago, on Fri, May 14, 1971
Does the NSN 5310-00-432-3497 contain any precious metals?
Type/content is unknown
Does the NSN 5310-00-432-3497 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products