Lift-Check Valve
27890
(NSN) National Stock Number
4820-00-332-9847
Federal Supply Classification
4820 Nonpowered Valves
Item Name Code
27828
Schedule B Code
8481309000
Summary
3b 1st end thread class, right-hand 1st end thread direction, spring disk loading method, gasket seal (boss) 1st end connection style, threaded internal tube 1st end connection type, threaded fastener mounting facility
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| X | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | SB |
Identification
A valve with a stem that may be mechanically actuated to two different positions by rotary or linear motion. In the first position, one side of the valve disk is located against the seat permitting movement of the disk in a manner that will allow a flow of fluid in one direction through the valve. In the second position, the valve disk is lifted from the seat to allow a flow of fluid in either direction through the valve. The valve disk may be spring loaded. See also valve, stop-check and valve, stop-lift-check.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 27828 | A530B0 | 1 | 2 |
Specifications
Thread Class
3b 1st end
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand 1st end
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Disk Loading Method
spring
Details
The means of closing the item when inlet pressure decreases.Connection Style
gasket seal (boss) 1st end
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.Connection Type
threaded internal tube 1st end
Details
Indicates the type of connection/s/.Mounting Facility
threaded fastener
Details
The facility for mounting the item.Mounting Position
horizontal
Details
The installed position for which the item is designed.Thread Quantity Per Inch
20 1st end
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Maximum Operating Pressure
3000.0 pounds per square inch single response
Details
The maximum pressure at which the item is rated for operation.Nominal Thread Size
0.437 inches 1st end
Details
A designation that is used for the purpose of general identification of the thread.Seat Angle
45.0 degrees 1st end
Details
The angle of the end surface upon which the mated surface seats.Nominal Outside Diameter Tube Accommodated
0.250 inches 1st end
Details
The nominal length of a straight line which passes through the center of the accommodated tube,and terminates at the outside circumference.Special Features
60 deg porm 10 deg lh or rh for open position
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Material
aluminum alloy body
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
aluminum alloy seat
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel flow control device
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Media For Which Designed
hydraulic fluid, phosphate-ester base single response
Details
The type of media for which the item is designed.Surface Treatment
anodize
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Style Designator
straight thru
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Thread Series Designator
unf 1st end
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 14-354-1 | 92003 | X | - | 3 | 2 | - | SB |
| 13190 | 99643 | 5 | - | 5 | 2 | - | SB |
| 20-91013 | 76301 | 2 | - | 5 | 2 | - | SB |
| 5910 | 70236 | 5 | - | C | 1 | - | ZZ |
| 5910 | 57817 | X | - | 5 | 9 | - | SB |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 64490 | - | P | P |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 594 | Z | Z |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
FAQs
Frequently asked questions for NSN 4820-00-332-9847
What is the NIIN of the NSN 4820-00-332-9847?
The National Item Identification Number (NIIN) of the NSN 4820-00-332-9847 is 00-332-9847
When the NSN 4820-00-332-9847 was assigned to the Federal Catalog?
It was assigned 61 years ago, on Tue, Jan 1, 1963
Does the NSN 4820-00-332-9847 contain any precious metals?
Does not contain precious metal
Does the NSN 4820-00-332-9847 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products