Threaded Tapered Pin
9646577-07
(NSN) National Stock Number
5315-01-471-7513
Federal Supply Classification
5315 Nails, Machine Keys and Pins
Item Name Code
05444
Schedule B Code
-
Summary
Chamfered first end style, radius second end style, 3a thread class, right-hand thread direction, 0.406 inches nominal thread length, 2.860 inches minimum and 2.891 inches maximum taper length
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | C |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 1 | 9F | - | ZZ |
Identification
A cone-shaped headless item, having a threaded portion at either end. It is used for aligning, fastening, and the like by fitting into a corresponding taper reamed hole.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 05444 | A212A0 | - | 1 |
Specifications
First End Style
chamfered
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.Second End Style
radius
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.Thread Class
3a
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Length
0.406 inches nominal
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Taper Length
2.860 inches minimum and 2.891 inches maximum
Details
A measurement of the longest dimension of the tapered portion of an item,in distinction from width.Taper Minor Diameter
0.191 inches minimum and 0.201 inches maximum
Details
The length of a straight line which passes through the center of the smallest circular cross section of the tapered portion,and terminates at the circumference.Taper Major Diameter
0.625 inches nominal
Details
The length of a straight line which passes through the center of the largest circular cross section of the tapered portion,and terminates at the circumference.End Item Identification
actuator horn, rudder, freedom fighter f-5 aircraft
Details
The national stock number or the identification information of the end equipment for which the item is a part.Second End Corner Radius
0.484 inches minimum and 0.516 inches maximum
Details
The measured distance from a fixed point to a variable point on a curve or curved surface.First End Taper Length
0.027 inches nominal
Details
None.Thread Quantity Per Inch
28
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Second End Relationship With First End
not identical
Details
Indicates whether or not the second end is identical to the first end.Nominal Thread Size
0.250 inches
Details
A designation that is used for the purpose of general identification of the thread.Taper
0.500 per foot in inches
Details
The amount of taper measured parallel to the longitudinal axis of the item per specific measurement scale.First End Location
threaded end
Details
Indicates the location of the first end.Angle Between Centerline Of Holes
45.0 degrees nominal
Details
None.Special Features
overall length is 3.5 inches;threads per mil-s-8879;sharp external corners shall have a .005 to .015 inch radius or .005 inch by 45 degree chamfer;heat treat to 160-180 ksi per mil-h-6875;solid film lube all surfaces per mil-l-46010, exept threads;magnetic particle inspection per astm e 1444;shoulder 0.047 inches wide;small end diameter 0.380 nominally
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Material
steel comp 4130 overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
mil-s-6758,condf4 mil spec single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
phosphate overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
dod-p-16232,typem,cl3,ortyper type z, cl 3 fed spec single treatment response overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Style Designator
threaded at small end
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Thread Series Designator
unjf
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 9646577-07 | 76823 | 5 | - | 3 | 2 | - | ZZ |
| 9646577-07 | 98750 | A | - | 3 | 9 | - | ZZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 54430 | - | U | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 575 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
WARNER ROBINS AIR LOGISTICS CENTER
CAGE: 98752
WARNER ROBINS
, GA
, 31098-1640
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5315-01-471-7513
What is the NIIN of the NSN 5315-01-471-7513?
The National Item Identification Number (NIIN) of the NSN 5315-01-471-7513 is 01-471-7513
When the NSN 5315-01-471-7513 was assigned to the Federal Catalog?
It was assigned 24 years ago, on Mon, Feb 14, 2000
Does the NSN 5315-01-471-7513 contain any precious metals?
Does not contain precious metal
Does the NSN 5315-01-471-7513 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products