Hollow Pin
A51C34512-11
(NSN) National Stock Number
5315-00-003-3929
Federal Supply Classification
5315 Nails, Machine Keys and Pins
Item Name Code
19979
Schedule B Code
7319409000
Summary
Countersunk first end style, 1.0620 inches minimum and 1.0625 inches maximum inside diameter, 2.240 inches minimum and 2.245 inches maximum pin overall length, 1.8740 inches minimum and 1.8743 inches maximum pin overall diameter, identical second end relationship with first end, 38.0 rockwell c minimum overall and 45.0 rockwell c maximum overall hardness rating
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | ZZ |
Identification
A cylindrically-shaped headless item, having a straight smooth body and a hole through the longitudinal center. Its length must not exceed five times its diameter or 12 inches (304 mm), whichever is greater. Excludes:bearing, sleeve; and pin, piston.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 19979 | A212A0 | - | 1 |
Specifications
First End Style
countersunk
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.Inside Diameter
1.0620 inches minimum and 1.0625 inches maximum
Details
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.Pin Overall Length
2.240 inches minimum and 2.245 inches maximum
Details
The overall dimension measured along the longitudinal axis,with terminated points at the extreme ends of the pin.Pin Overall Diameter
1.8740 inches minimum and 1.8743 inches maximum
Details
The overall length of a straight line which passes through the center of the pin,and terminates at the outside circumference.Second End Relationship With First End
identical
Details
Indicates whether or not the second end is identical to the first end.Hardness Rating
38.0 rockwell c minimum overall and 45.0 rockwell c maximum overall
Details
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.Criticality Code Justification
achu and aarx
Details
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.First End Countersink Angle
60.0 degrees nominal
Details
None.First End Countersink Diameter
1.122 inches nominal
Details
None.Material
steel comp xm-12 overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
ams5659 fscm 26512 mfr ref single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
passivate overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
mil-s-5002 mil spec single treatment response overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Test Data Document
81349-mil-i-6868 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| A51C34512-11 | 61174 | 1 | - | 3 | 9 | - | KE |
| A51C34512-11 | 26512 | 1 | - | 5 | 9 | - | KE |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 49790 | - | Q | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
NORTHROP GRUMMAN SYSTEMS CORPORATION
CAGE: 79RG9
JACKSONVILLE
, FL
, 32221-8130
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5315-00-003-3929
What is the NIIN of the NSN 5315-00-003-3929?
The National Item Identification Number (NIIN) of the NSN 5315-00-003-3929 is 00-003-3929
When the NSN 5315-00-003-3929 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Wed, May 24, 1972
Does the NSN 5315-00-003-3929 contain any precious metals?
Type/content is unknown
Does the NSN 5315-00-003-3929 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products