Headless Straight Pin
1285628-101
(NSN) National Stock Number
5315-00-316-5822
Federal Supply Classification
5315 Nails, Machine Keys and Pins
Item Name Code
02390
Schedule B Code
7319409000
Summary
Chamfered first end style, one end drilled hole arrangement style, 0.256 inches minimum and 0.263 inches maximum first hole diameter, 0.750 inches nominal distance from centerline of hole to end of pin, 2.720 inches nominal pin overall length, 0.7478 inches minimum and 0.7488 inches maximum pin overall diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | KE |
Identification
A headless, generally cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 mm); for items whose length exceeds twelve inches (304 mm); see rod,straight,headless. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also pin,straight,threaded.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 02390 | A212A0 | - | 1 |
Specifications
First End Style
chamfered
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.Hole Arrangement Style
one end drilled
Details
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.First Hole Diameter
0.256 inches minimum and 0.263 inches maximum
Details
None.Distance From Centerline Of Hole To End Of Pin
0.750 inches nominal
Details
None.Pin Overall Length
2.720 inches nominal
Details
The overall dimension measured along the longitudinal axis,with terminated points at the extreme ends of the pin.Pin Overall Diameter
0.7478 inches minimum and 0.7488 inches maximum
Details
The overall length of a straight line which passes through the center of the pin,and terminates at the outside circumference.First End Taper Length
0.040 inches nominal
Details
None.Second End Relationship With First End
identical
Details
Indicates whether or not the second end is identical to the first end.First End Taper Angle
45.0 degrees nominal
Details
None.Criticality Code Justification
achu
Details
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.Surface Finish
125.0 microinches overall
Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Special Features
0.250-28 unjf 3b thd 0.500 in. deep csk 0.350 in. min 0.380 in. max dia by 60 deg porm 5 one end
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Material
steel overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Surface Treatment
cadmium overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Test Data Document
36659-lc+72-1076 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 49790 | - | Q | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
LOCKHEED MARTIN CORP DIV LOCKHEED MARTIN AERONAUTICS COMPANY
CAGE: 98897
MARIETTA
, GA
, 30063-0001
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5315-00-316-5822
What is the NIIN of the NSN 5315-00-316-5822?
The National Item Identification Number (NIIN) of the NSN 5315-00-316-5822 is 00-316-5822
When the NSN 5315-00-316-5822 was assigned to the Federal Catalog?
It was assigned 51 years ago, on Sun, Nov 11, 1973
Does the NSN 5315-00-316-5822 contain any precious metals?
Type/content is unknown
Does the NSN 5315-00-316-5822 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.