Headless Shoulder Pin
556AS144-2
(NSN) National Stock Number
5315-00-119-7522
Federal Supply Classification
5315 Nails, Machine Keys and Pins
Item Name Code
16749
Schedule B Code
-
Summary
Chamfered first end style, chamfered second end style, 0.375 inches nominal shank length, 0.498 inches minimum and 0.500 inches maximum shoulder diameter, 0.370 inches minimum and 0.375 inches maximum shank diameter, 2.375 inches nominal overall length
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | KE |
Identification
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 16749 | A212A0 | - | 1 |
Specifications
First End Style
chamfered
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.Second End Style
chamfered
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.Shank Length
0.375 inches nominal
Details
A measurement of the longest dimension of the shank,in distinction from width.Shoulder Diameter
0.498 inches minimum and 0.500 inches maximum
Details
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.Shank Diameter
0.370 inches minimum and 0.375 inches maximum
Details
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.Overall Length
2.375 inches nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Hole Arrangement Style
one end drilled
Details
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.First Hole Diameter
0.190 inches nominal
Details
None.Distance From Centerline Of Hole To End Of Pin
0.187 inches nominal
Details
None.First End Taper Length
0.031 inches nominal
Details
None.Second End Taper Length
0.125 inches nominal
Details
A measurement of the longest taper dimension at the second end,in distinction from width.Second End Relationship With First End
not identical
Details
Indicates whether or not the second end is identical to the first end.Hardness Rating
28.0 rockwell c minimum and 30.0 rockwell c maximum overall
Details
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.Second Shank Diameter
0.370 inches minimum and 0.375 inches maximum
Details
None.First End Location
long end
Details
Indicates the location of the first end.First End Taper Angle
45.0 degrees nominal
Details
None.Surface Finish
63.0 microinches outside diameter
Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Second End Taper Angle
15.0 degrees nominal
Details
None.Second Shank Length
1.625 inches nominal
Details
None.Special Features
hole tapped 10-24 umc 3b thread and short shank chamfer to have a 0.031 in. radius
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Material
steel comp 416 overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
astm a582 assn std single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
passivate overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Style Designator
shoulder
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 49790 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER
CAGE: 30003
PATUXENT RIVER
, MD
, 20670-1547
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5315-00-119-7522
What is the NIIN of the NSN 5315-00-119-7522?
The National Item Identification Number (NIIN) of the NSN 5315-00-119-7522 is 00-119-7522
When the NSN 5315-00-119-7522 was assigned to the Federal Catalog?
It was assigned 51 years ago, on Wed, Dec 27, 1972
Does the NSN 5315-00-119-7522 contain any precious metals?
Type/content is unknown
Does the NSN 5315-00-119-7522 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.