Headless Shoulder Pin
4031511
(NSN) National Stock Number
5315-00-377-4220
Federal Supply Classification
5315 Nails, Machine Keys and Pins
Item Name Code
16749
Schedule B Code
7319409000
Summary
Chamfered first end style, chamfered second end style, 0.870 inches minimum and 0.890 inches maximum shank length, 0.220 inches minimum and 0.221 inches maximum shoulder diameter, 0.115 inches minimum and 0.120 inches maximum shank diameter, 2.275 inches minimum and 2.285 inches maximum overall length
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 2 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | ZZ |
Identification
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 16749 | A212A0 | - | 1 |
Specifications
First End Style
chamfered
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.Second End Style
chamfered
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.Shank Length
0.870 inches minimum and 0.890 inches maximum
Details
A measurement of the longest dimension of the shank,in distinction from width.Shoulder Diameter
0.220 inches minimum and 0.221 inches maximum
Details
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.Shank Diameter
0.115 inches minimum and 0.120 inches maximum
Details
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.Overall Length
2.275 inches minimum and 2.285 inches maximum
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Hole Arrangement Style
one end drilled
Details
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.First Hole Diameter
0.065 inches minimum and 0.072 inches maximum
Details
None.Distance From Centerline Of Hole To End Of Pin
0.095 inches nominal
Details
None.First End Taper Length
0.010 inches minimum and 0.030 inches maximum
Details
None.Second End Taper Length
0.040 inches minimum and 0.060 inches maximum
Details
A measurement of the longest taper dimension at the second end,in distinction from width.Second End Relationship With First End
not identical
Details
Indicates whether or not the second end is identical to the first end.Hardness Rating
30.0 rockwell c minimum overall and 38.0 rockwell c maximum overall
Details
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.First End Location
both ends
Details
Indicates the location of the first end.First End Taper Angle
40.0 degrees minimum and 50.0 degrees maximum
Details
None.Surface Finish
32.0 microinches shoulder end
Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Second End Taper Angle
43.0 degrees minimum and 47.0 degrees maximum
Details
None.Material
steel comp 410 overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
ams 5613 assn std single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Style Designator
shoulder
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 4031511 | 52661 | 5 | - | 5 | 2 | - | ZZ |
| 4031511 | 11449 | 2 | - | 3 | 9 | - | SB |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 54080 | - | Q | Q |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 576 | Z | Z |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY
CAGE: 77445
EAST HARTFORD
, CT
, 06118-3811
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5315-00-377-4220
What is the NIIN of the NSN 5315-00-377-4220?
The National Item Identification Number (NIIN) of the NSN 5315-00-377-4220 is 00-377-4220
When the NSN 5315-00-377-4220 was assigned to the Federal Catalog?
It was assigned 50 years ago, on Sat, Mar 16, 1974
Does the NSN 5315-00-377-4220 contain any precious metals?
Type/content is unknown
Does the NSN 5315-00-377-4220 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products