Headless Shoulder Pin
1C5601-2P04
(NSN) National Stock Number
5315-00-410-3442
Federal Supply Classification
5315 Nails, Machine Keys and Pins
Item Name Code
16749
Schedule B Code
-
Summary
Chamfered first end style, 1.813 inches nominal shank length, 1.528 inches minimum and 1.530 inches maximum shoulder diameter, 1.030 inches minimum and 1.060 inches maximum shank diameter, 7.770 inches minimum and 7.810 inches maximum overall length, 0.860 inches minimum and 0.880 inches maximum undercut diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 2 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | SB |
Identification
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 16749 | A212A0 | - | 1 |
Specifications
First End Style
chamfered
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.Shank Length
1.813 inches nominal
Details
A measurement of the longest dimension of the shank,in distinction from width.Shoulder Diameter
1.528 inches minimum and 1.530 inches maximum
Details
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.Shank Diameter
1.030 inches minimum and 1.060 inches maximum
Details
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.Overall Length
7.770 inches minimum and 7.810 inches maximum
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Undercut Diameter
0.860 inches minimum and 0.880 inches maximum
Details
None.Undercut Width
0.312 inches nominal
Details
None.Hole Arrangement Style
one end drilled
Details
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.First Hole Diameter
0.344 inches minimum and 0.351 inches maximum
Details
None.Distance From Centerline Of Hole To End Of Pin
3.630 inches nominal
Details
None.First End Taper Length
0.040 inches minimum and 0.060 inches maximum
Details
None.Features Provided
casehardened
Details
Those features,not otherwise specified,which may be required for proper functioning of the item.Second End Relationship With First End
identical
Details
Indicates whether or not the second end is identical to the first end.Second Shank Diameter
0.997 inches minimum and 0.999 inches maximum
Details
None.First End Location
both ends
Details
Indicates the location of the first end.Surface Finish
16.0 microinches short shank end
Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Surface Finish
63.0 microinches outside diameter
Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Second Shank Length
1.370 inches minimum and 1.390 inches maximum
Details
None.Special Features
long shank has medium diamond knurl; shoulder end opposite groove chamfered 30 deg
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Material
steel overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
aisi 8620 assn std single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Style Designator
undercut
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 54080 | - | Q | Q |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 576 | Z | Z |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
FAQs
Frequently asked questions for NSN 5315-00-410-3442
What is the NIIN of the NSN 5315-00-410-3442?
The National Item Identification Number (NIIN) of the NSN 5315-00-410-3442 is 00-410-3442
When the NSN 5315-00-410-3442 was assigned to the Federal Catalog?
It was assigned 55 years ago, on Wed, Aug 20, 1969
Does the NSN 5315-00-410-3442 contain any precious metals?
Type/content is unknown
Does the NSN 5315-00-410-3442 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.