Blind Rivet

RV1301-5-4

(NSN) National Stock Number

5320-00-007-6381

Federal Supply Classification

5320 Rivets

Item Name Code

00864

Schedule B Code

7616103000

Summary

0.388 inches nominal fastener length, flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style, 0.155 inches minimum and 0.159 inches maximum shank diameter, self-plugging mechanically locked stem shank style, 0.282 inches minimum and 0.290 inches maximum head major diameter, serrated stem-type w expansion device

DAC	HCC	DMIL	RNCC
5	-	-	5

RNVC	SADC	MSDS	RNAAC
2	-	-	ZZ

Identification

An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes:nut, blind assembly.

INC	FIIG	Concept	Condition
00864	A040A0	-	1

Specifications

Fastener Length

0.388 inches nominal

Details

The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

Head Style

flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

Shank Diameter

0.155 inches minimum and 0.159 inches maximum

Details

The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.

Shank Style

self-plugging mechanically locked stem

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.

Head Major Diameter

0.282 inches minimum and 0.290 inches maximum

Details

None.

Expansion Device

serrated stem-type w

Details

The device by which the item is expanded and set.

Grip Length

0.188 inches minimum and 0.258 inches maximum

Details

A measurement of the longest dimension of the grip,in distinction from width.

Shear Strength

710 single pounds per square inch

Details

The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.

Countersink Angle

99.0 degrees minimum and 101.0 degrees maximum

Details

The included angle of the countersink.

Heat Treatment

h-38 strain hardened locking ring

Details

A combination of timed heating and cooling operations applied for the purpose of annealing or hardening the item.

Material

aluminum alloy 5056 locking ring

Details

The chemical compound or mechanical mixture properties of which the item is fabricated.

Material Document And Classification

qq-a-430 fed spec single material response locking ring

Details

The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.

Surface Treatment

anodize overall or chromate overall

Details

The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

Surface Treatment Document And Classification

mil-a-8625 mil spec 1st treatment response or mil-c-5541 mil spec 2nd treatment response overall

Details

The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
CR2172-5-4	R1120	6	-	5	2	-	ZG
10123398	A486G	9	-	6	9	-	WF
RV1201-5-4	C4293	3	-	5	2	-	ZG
NAS1399D5A4	5R386	6	-	5	2	-	9Z
RV1201-5-4	53551	5	-	5	2	-	KZ
RV1341D5-4	53551	5	-	5	9	-	KZ
CR2172-5-4	11815	A	-	5	2	-	KZ
RV1201-5-4	92215	5	-	5	2	-	KZ
RV1201-5-4	98996	4	-	5	9	-	SE
3M1235D5-4	76301	A	-	5	2	-	KZ
NAS1399D5A4	2G586	6	-	5	2	-	9Z
NAS1399D5A4	80205	4	-	3	2	-	KZ

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
N	U	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
54760	-	U	-

RVC	WCC	TCC	SHC
-	576	Z	9

Certified Supplier

Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.

Genuine Manufacturers Parts
100% Product Inspection
7 Year Sales Record Retention
Fast On-Time Delivery
HAZMAT Certified
Global Shipping

Manufacturer

ALLFAST FASTENING SYSTEMS, LLC

CAGE: 53551

CITY OF INDUSTRY , CA , 91745-1001

UNITED STATES

View Products

FAQs

Frequently asked questions for NSN 5320-00-007-6381

What is the NIIN of the NSN 5320-00-007-6381?

The National Item Identification Number (NIIN) of the NSN 5320-00-007-6381 is 00-007-6381

When the NSN 5320-00-007-6381 was assigned to the Federal Catalog?

It was assigned 52 years ago, on Thu, Jul 6, 1972

Does the NSN 5320-00-007-6381 contain any precious metals?

Type/content is unknown

Does the NSN 5320-00-007-6381 contain any hazardous material?

No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.