Internally Relieved Body Bolt
4P03006-101C
(NSN) National Stock Number
5306-00-146-3104
Federal Supply Classification
5306 Bolts
Item Name Code
06676
Schedule B Code
7318152000
Summary
3a thread class, right-hand thread direction, 0.510 inches minimum and 0.520 inches maximum thread length, 5.040 inches nominal fastener length, hexagon head style, 0.210 inches nominal head height
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | SE |
Identification
An externally threaded fastener whose external threaded portion is of one nominal diameter. It has a concentric hole along the longitudinal centerline which may extend a part or the full length of the bolt. The concentric hole along the centerline may be counterbored and/or internally threaded at the head end or the bolt end. The head is designed to be held or driven by an external and/or internal driver. For items having a hole(s) perpendicular to the axis which meet the concentric hole along the longitudinal centerline, see bolt, fluid passage.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 06676 | A003B0 | - | 1 |
Specifications
Thread Class
3a
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Length
0.510 inches minimum and 0.520 inches maximum
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Fastener Length
5.040 inches nominal
Details
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.Head Style
hexagon
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.Head Height
0.210 inches nominal
Details
A measurement from the bottom to the top of the head,in distinction from depth.Width Between Flats
1.801 inches minimum and 1.815 inches maximum
Details
None.Shoulder Diameter
1.2483 inches minimum and 1.2503 inches maximum
Details
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.Shoulder Length
4.270 inches minimum and 4.280 inches maximum
Details
The length of the enlarged portion/s/ located on the shank of the item.Concentric Hole Diameter
0.501 inches minimum and 0.503 inches maximum
Details
None.Nominal Thread Diameter
1.000 inches
Details
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.Thread Quantity Per Inch
12
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Minimum Tensile Strength
195000 pounds per square inch
Details
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.Material
steel overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
mil-s-5000 cond e1 mil spec single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
nickel overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
ds30000 code n cl 3 fscm 98897 mfr ref single treatment response overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Style Designator
concentric hole unthreaded
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Thread Series Designator
unjf
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 48950 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 573 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
LOCKHEED MARTIN CORP DIV LOCKHEED MARTIN AERONAUTICS COMPANY
CAGE: 98897
MARIETTA
, GA
, 30063-0001
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5306-00-146-3104
What is the NIIN of the NSN 5306-00-146-3104?
The National Item Identification Number (NIIN) of the NSN 5306-00-146-3104 is 00-146-3104
When the NSN 5306-00-146-3104 was assigned to the Federal Catalog?
It was assigned 53 years ago, on Fri, Sep 24, 1971
Does the NSN 5306-00-146-3104 contain any precious metals?
Type/content is unknown
Does the NSN 5306-00-146-3104 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.