Eye Bolt
8438279
(NSN) National Stock Number
5306-00-136-1488
Federal Supply Classification
5306 Bolts
Item Name Code
01853
Schedule B Code
7318152000
Summary
2a thread class, right-hand thread direction, 1.344 inches minimum and 1.406 inches maximum thread length, 0.374 inches minimum and 0.377 inches maximum eye inside diameter, 1.969 inches minimum and 2.031 inches maximum shank length, 0.495 inches minimum and 0.500 inches maximum eye stock thickness
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | KZ |
Identification
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also bolt, hook. Excludes:connector, rod end.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 01853 | A003B0 | - | 1 |
Specifications
Thread Class
2a
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Length
1.344 inches minimum and 1.406 inches maximum
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Eye Inside Diameter
0.374 inches minimum and 0.377 inches maximum
Details
The length of a straight line which passes through the center of the eye and terminates at the inner periphery.Shank Length
1.969 inches minimum and 2.031 inches maximum
Details
A measurement of the longest dimension of the shank,in distinction from width.Eye Stock Thickness
0.495 inches minimum and 0.500 inches maximum
Details
None.Overall Length
2.844 inches minimum and 2.908 inches maximum
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Nominal Thread Diameter
0.375 inches
Details
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.Thread Quantity Per Inch
16
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Minimum Tensile Strength
125000 pounds per square inch
Details
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.Hardness Rating
28.0 rockwell c minimum overall and 32.0 rockwell c maximum overall
Details
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.Distance From Center Of Eye To Shank End
2.531 inches maximum
Details
None.Eye Outside Width
0.750 inches nominal
Details
None.Special Features
one 0.094 drilled hole thru eye and 0.375 dia hole and no. 6-32 unc-2b tapped hole 0.300 deep in face at threaded end
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Material
steel overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Surface Treatment
phosphate zinc overall or phosphate overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
mil-std 171,class 1 mil spec single treatment response overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Style Designator
round, closed
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Thread Series Designator
unc
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 48950 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 573 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
ARMY, UNITED STATES DEPARTMENT OF THE DBA ROCK ISLAND ARSENAL JMTC
CAGE: 19204
ROCK ISLAND
, IL
, 61299-5000
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5306-00-136-1488
What is the NIIN of the NSN 5306-00-136-1488?
The National Item Identification Number (NIIN) of the NSN 5306-00-136-1488 is 00-136-1488
When the NSN 5306-00-136-1488 was assigned to the Federal Catalog?
It was assigned 55 years ago, on Fri, Jan 24, 1969
Does the NSN 5306-00-136-1488 contain any precious metals?
Does not contain precious metal
Does the NSN 5306-00-136-1488 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.