Shoulder Bolt
A51P60747-13
(NSN) National Stock Number
5306-00-003-3885
Federal Supply Classification
5306 Bolts
Item Name Code
04905
Schedule B Code
8109900000
Summary
3a thread class, right-hand thread direction, 0.452 inches maximum thread length, 2.102 inches nominal fastener length, hexagon head style, 0.250 inches minimum and 0.265 inches maximum head height
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | C |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 1 | 9X | - | ZZ |
Identification
An externally threaded fastener whose threaded portion is of one nominal diameter, no. 10 (0.190 in.) (5 mm) or larger. It has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. The head is not designed to be held or driven with an inserted drivers. A locking feature may be incorporated in the design of the head or threads. For items with a thread diameter smaller than no. 10 (0.190 in.) (5 mm) and those items with an inserted drive head, use screw, shoulder. For items which are no. 10 (0.190 in.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use bolt, externally relieved body. Excludes:thumbscrew.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 04905 | A003B0 | - | 1 |
Specifications
Thread Class
3a
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Length
0.452 inches maximum
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Fastener Length
2.102 inches nominal
Details
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.Head Style
hexagon
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.Head Height
0.250 inches minimum and 0.265 inches maximum
Details
A measurement from the bottom to the top of the head,in distinction from depth.Width Between Flats
0.928 inches minimum and 0.940 inches maximum
Details
None.Shoulder Diameter
0.6230 inches minimum first shoulder and 0.6240 inches maximum first shoulder
Details
The length of a straight line which passes through the center of the shoulder and terminates at the circumference.Shoulder Length
1.550 inches nominal first shoulder
Details
The length of the enlarged portion of the shank on the item,in distinction from width or diameter.Shank Unthreaded Hole Diameter
0.106 inches minimum first hole and 0.116 inches maximum first hole
Details
The length of a straight line which passes through the center of the shank unthreaded hole,and terminates at the inside circumference.Nominal Thread Diameter
0.500 inches
Details
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.Thread Quantity Per Inch
20
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Distance From Head Largest Bearing Surface To Shank Hole Center
1.910 inches nominal first hole
Details
The distance from the shank hole centerline to the largest bearing surface of the head.Shoulder Shape
round first shoulder
Details
The physical configuration of the unthreaded portion of a body adjacent to the head which is larger than the diameter of the shank.Material
titanium alloy overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
g-3111,comp 6al-6v-2sn,fsc-26512 mfr ref single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Test Data Document
81349-mil-i-6868 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Thread Series Designator
unjf
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| A51P60747-13 | 61174 | 1 | - | 3 | 9 | - | KE |
| A51P60747-13 | 26512 | 1 | - | 5 | 9 | - | KE |
| A51P60747-13 | 05722 | 5 | - | 5 | 2 | - | KZ |
| A51P60747-13 | 02108 | 5 | - | 5 | 2 | - | ZZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 68455 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
NORTHROP GRUMMAN SYSTEMS CORPORATION
CAGE: 79RG9
JACKSONVILLE
, FL
, 32221-8130
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5306-00-003-3885
What is the NIIN of the NSN 5306-00-003-3885?
The National Item Identification Number (NIIN) of the NSN 5306-00-003-3885 is 00-003-3885
When the NSN 5306-00-003-3885 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Wed, May 24, 1972
Does the NSN 5306-00-003-3885 contain any precious metals?
Type/content is unknown
Does the NSN 5306-00-003-3885 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products