Spacing Threaded Standoff
TS2200A1D64
(NSN) National Stock Number
5340-01-646-7490
Federal Supply Classification
5340 Commercial Hardware
Item Name Code
40280
Schedule B Code
-
Summary
2b left internal (includes thru thread) thread class, 2b right internal thread class, right-hand left internal (includes thru thread) thread direction, right-hand right internal thread direction, 0.500 inches minimum left internal (includes thru thread) thread length, 0.500 inches minimum right internal thread length
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| E | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | 9Z |
Identification
A standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see stud (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see nut (as modified); use maximum dimensions(s) for compliance.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 40280 | A08900 | 1 | 1 |
Specifications
Thread Class
2b left internal (includes thru thread)
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Class
2b right internal
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand left internal (includes thru thread)
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Direction
right-hand right internal
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Length
0.500 inches minimum left internal (includes thru thread)
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Thread Length
0.500 inches minimum right internal
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Length
3.995 inches minimum and 4.005 inches maximum
Details
A measurement of the longest dimension of any object,in distinction from width.Cross-Sectional Length
3.995 inches minimum and 4.005 inches maximum
Details
A measurement of the longest dimension of the cross section,in distinction from width.Cross-Sectional Width
0.248 inches minimum and 0.252 inches maximum
Details
A measurement of the cross section taken at right angles to the length,in distinction from thickness.Cross-Sectional Shape
rectangular
Details
The geometric configuration of the item when viewed in cross section.Thread Quantity Per Inch
40 left internal (includes thru thread)
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Thread Quantity Per Inch
40 right internal
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Nominal Thread Size
0.112 inches left internal (includes thru thread)
Details
A designation that is used for the purpose of general identification of the thread.Nominal Thread Size
0.112 inches right internal
Details
A designation that is used for the purpose of general identification of the thread.Part Name Assigned By Controlling Agency
spacer, threaded hex
Details
The name assigned to the item by the government agency or commercial organization controlling the design of the item.Special Features
finish is alodine per mil-c-5541, tps1-418
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Material
aluminum alloy 2024 or aluminum alloy 7075 overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
astm-b211 assn std all material responses and ams-qq-a-225 assn std all material responses overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Style Designator
left internal and right internal threads
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| - | - | - | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | - | - | - |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
L3HARRIS TECHNOLOGIES INTEGRATED SYSTEMS L.P.
CAGE: 05395
GREENVILLE
, TX
, 75402-3119
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5340-01-646-7490
What is the NIIN of the NSN 5340-01-646-7490?
The National Item Identification Number (NIIN) of the NSN 5340-01-646-7490 is 01-646-7490
When the NSN 5340-01-646-7490 was assigned to the Federal Catalog?
It was assigned 9 years ago, on Wed, Jul 29, 2015
Does the NSN 5340-01-646-7490 contain any precious metals?
Does not contain precious metal
Does the NSN 5340-01-646-7490 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.