Spacing Threaded Standoff
SD52135
(NSN) National Stock Number
5340-00-206-3015
Federal Supply Classification
5340 Commercial Hardware
Item Name Code
40280
Schedule B Code
-
Summary
2b left internal (includes thru thread)3a right external thread class, right-hand left internal (includes thru thread) thread direction, right-hand right external thread direction, 0.750 inches nominal right external thread length, 0.406 inches nominal flange diameter, 1.177 inches minimum and 1.187 inches maximum flange thickness
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | KZ |
Identification
A standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see stud (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see nut (as modified); use maximum dimensions(s) for compliance.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 40280 | A08900 | 1 | 1 |
Specifications
Thread Class
2b left internal (includes thru thread)3a right external
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand left internal (includes thru thread)
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Direction
right-hand right external
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Length
0.750 inches nominal right external
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Flange Diameter
0.406 inches nominal
Details
The length of a straight line which passes through the center of a flange,and terminates at the circumference.Flange Thickness
1.177 inches minimum and 1.187 inches maximum
Details
A measurement of the smallest dimension of a flange,in distinction from length or width.Length
3.177 inches minimum and 3.187 inches maximum
Details
A measurement of the longest dimension of any object,in distinction from width.Thread Quantity Per Inch
28 right external
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Thread Quantity Per Inch
32 left internal (includes thru thread)
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Nominal Thread Size
0.250 inches right external
Details
A designation that is used for the purpose of general identification of the thread.Nominal Thread Size
0.190 inches left internal (includes thru thread)
Details
A designation that is used for the purpose of general identification of the thread.Special Features
0.060 in.min,0.066 in.max w by 0.095 in.deep slot on flat of internal thd end;and 0.195 in.min,0.200 in.max dia by 0.095 in.deep counterbore on internal thd end
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Material
steel standoff
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Surface Treatment
zinc standoff
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Style Designator
flanged with left internal thread
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Thread Series Designator
unf left internal (includes thru thread)
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Thread Series Designator
unf right external
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 7002860 | 19207 | X | - | 3 | 2 | - | XX |
| SD52135 | 01843 | 5 | - | 5 | 9 | - | KZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 48950 | - | W | U |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 573 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
UNITED TECHNOLOGIES CORP ELECTRO SYSTEMS INC
CAGE: 24956
COLUMBUS
, MS
, 39701
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5340-00-206-3015
What is the NIIN of the NSN 5340-00-206-3015?
The National Item Identification Number (NIIN) of the NSN 5340-00-206-3015 is 00-206-3015
When the NSN 5340-00-206-3015 was assigned to the Federal Catalog?
It was assigned 61 years ago, on Tue, Jan 1, 1963
Does the NSN 5340-00-206-3015 contain any precious metals?
Type/content is unknown
Does the NSN 5340-00-206-3015 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products