Spacing Threaded Standoff
164B8103G1
(NSN) National Stock Number
5340-00-346-4869
Federal Supply Classification
5340 Commercial Hardware
Item Name Code
40280
Schedule B Code
-
Summary
2b left internal (includes thru thread)2a right external thread class, right-hand left internal (includes thru thread) thread direction, right-hand right external thread direction, 0.244 inches minimum and 0.249 inches maximum flange diameter, 0.290 inches minimum and 0.330 inches maximum flange thickness, 0.600 inches minimum and 0.620 inches maximum length
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 2 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | SB |
Identification
A standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see stud (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see nut (as modified); use maximum dimensions(s) for compliance.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 40280 | A08900 | 1 | 1 |
Specifications
Thread Class
2b left internal (includes thru thread)2a right external
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand left internal (includes thru thread)
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Direction
right-hand right external
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Flange Diameter
0.244 inches minimum and 0.249 inches maximum
Details
The length of a straight line which passes through the center of a flange,and terminates at the circumference.Flange Thickness
0.290 inches minimum and 0.330 inches maximum
Details
A measurement of the smallest dimension of a flange,in distinction from length or width.Length
0.600 inches minimum and 0.620 inches maximum
Details
A measurement of the longest dimension of any object,in distinction from width.Thread Quantity Per Inch
32 left internal (includes thru thread)
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Thread Quantity Per Inch
40 right external
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Nominal Thread Size
0.112 inches right external
Details
A designation that is used for the purpose of general identification of the thread.Nominal Thread Size
0.164 inches left internal (includes thru thread)
Details
A designation that is used for the purpose of general identification of the thread.Material
steel corrosion resisting standoff
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
ams 5643,cond a assn std single material response standoff
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
passivate standoff and oxide standoff
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
mil-std-171 finish 5.4.1 mil std 1st treatment response standoff and mil-c-13924 class 4 mil spec 2nd treatment response standoff
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Style Designator
flanged with left internal thread
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Thread Series Designator
unc left internal (includes thru thread)
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Thread Series Designator
unc right external
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 48950 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 573 | Z | Z |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
BAE SYSTEMS CONTROLS INC. DBA BAE SYSTEMS CONTROLS INC
CAGE: 89954
ENDICOTT
, NY
, 13760-2815
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5340-00-346-4869
What is the NIIN of the NSN 5340-00-346-4869?
The National Item Identification Number (NIIN) of the NSN 5340-00-346-4869 is 00-346-4869
When the NSN 5340-00-346-4869 was assigned to the Federal Catalog?
It was assigned 50 years ago, on Sun, Jan 20, 1974
Does the NSN 5340-00-346-4869 contain any precious metals?
Does not contain precious metal
Does the NSN 5340-00-346-4869 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.