Rod End Clevis
206-071-209-1
(NSN) National Stock Number
5340-00-135-4641
Federal Supply Classification
5340 Commercial Hardware
Item Name Code
03796
Schedule B Code
-
Summary
3a rod connection thread class, right-hand rod connection thread direction, 0.940 inches minimum rod connection and 1.000 inches maximum rod connection thread length, 1.630 inches nominal shank length, 0.249 inches minimum and 0.255 inches maximum hole diameter, 0.304 inches minimum and 0.311 inches maximum shank diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | CT |
Identification
A forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also yoke, universal joint and connector, rod end. For items specifically designed for aviation, see clevis, rod end, aviation.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 03796 | A264A0 | - | 2 |
Specifications
Thread Class
3a rod connection
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand rod connection
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Length
0.940 inches minimum rod connection and 1.000 inches maximum rod connection
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Shank Length
1.630 inches nominal
Details
A measurement of the longest dimension of the shank,in distinction from width.Hole Diameter
0.249 inches minimum and 0.255 inches maximum
Details
The length of a straight line which passes through the center of a hole,and terminates at the circumference.Shank Diameter
0.304 inches minimum and 0.311 inches maximum
Details
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.Overall Height
0.740 inches minimum and 0.760 inches maximum
Details
The distance measured in a straight line from the bottom to the top of an item.Overall Width
0.570 inches minimum and 0.590 inches maximum
Details
An overall measurement taken at right angles to the length of an item,in distinction from thickness.End Radius
0.365 inches minimum and 0.385 inches maximum
Details
A measurement of a straight line extending from the center of a circle to the end.Fork Span Width
0.270 inches minimum and 0.290 inches maximum
Details
The distance laterally from tip to tip of the fork.Distance From Pivot Pinhole Center To Rod Connection End
2.335 inches nominal
Details
None.Fork Arm Thickness
0.140 inches minimum and 0.160 inches maximum
Details
None.Fork Depth
0.530 inches minimum and 0.570 inches maximum
Details
The measurement between specified points of the fork,in distinction from height.Nominal Thread Size
0.312 inches rod connection
Details
A designation that is used for the purpose of general identification of the thread.Material
steel comp 4130 overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
mil-s-6758,cond d4 mil spec single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
chromate zinc overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
299-099-031,pzg1,bell helicopter co mfr ref single treatment response overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Style Designator
clevis
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Thread Series Designator
unf rod connection
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 49240 | - | U | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
FAQs
Frequently asked questions for NSN 5340-00-135-4641
What is the NIIN of the NSN 5340-00-135-4641?
The National Item Identification Number (NIIN) of the NSN 5340-00-135-4641 is 00-135-4641
When the NSN 5340-00-135-4641 was assigned to the Federal Catalog?
It was assigned 55 years ago, on Mon, Jan 13, 1969
Does the NSN 5340-00-135-4641 contain any precious metals?
Type/content is unknown
Does the NSN 5340-00-135-4641 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.