Rod End Clevis
1292695-101
(NSN) National Stock Number
5340-00-301-3089
Federal Supply Classification
5340 Commercial Hardware
Item Name Code
03796
Schedule B Code
-
Summary
3a rod connection thread class, right-hand rod connection thread direction, 1.500 inches nominal rod connection thread length, 1.700 inches nominal shank length, 0.4995 inches minimum and 0.5005 inches maximum hole diameter, 0.625 inches nominal shank diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | KE |
Identification
A forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also yoke, universal joint and connector, rod end. For items specifically designed for aviation, see clevis, rod end, aviation.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 03796 | A264A0 | - | 2 |
Specifications
Thread Class
3a rod connection
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand rod connection
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Length
1.500 inches nominal rod connection
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Shank Length
1.700 inches nominal
Details
A measurement of the longest dimension of the shank,in distinction from width.Hole Diameter
0.4995 inches minimum and 0.5005 inches maximum
Details
The length of a straight line which passes through the center of a hole,and terminates at the circumference.Shank Diameter
0.625 inches nominal
Details
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.Overall Diameter
1.000 inches nominal
Details
A measurement of the longest straight line across a circular cross-sectional plane.Fork Span Width
0.687 inches minimum and 0.692 inches maximum
Details
The distance laterally from tip to tip of the fork.Rod Connection Bore Diameter
0.1865 inches minimum and 0.1925 inches maximum
Details
The length of a straight line which passes through the center of a rod connection bore,and terminates at the circumference.Rod Connection Bore Depth
1.600 inches nominal
Details
The distance measured along a straight line parallel to the longitudinal axis which establishes the acceptable depth of the rod connection bore.Distance From Pivot Pinhole Center To Rod Connection End
3.370 inches nominal
Details
None.Fork Arm Thickness
0.140 inches nominal
Details
None.Fork Depth
1.420 inches nominal
Details
The measurement between specified points of the fork,in distinction from height.Nominal Thread Size
0.625 inches rod connection
Details
A designation that is used for the purpose of general identification of the thread.Criticality Code Justification
aaub
Details
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.Material
steel comp 4130 overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
mil-s-6758,cond d4 mil spec single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
cadmium overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
lc+77-1061,lockheed aircraft corp mfr ref single treatment response overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Style Designator
clevis
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Test Data Document
36659-lc+72-1076 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Thread Series Designator
unjf rod connection
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 49240 | - | U | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
LOCKHEED MARTIN CORP DIV LOCKHEED MARTIN AERONAUTICS COMPANY
CAGE: 98897
MARIETTA
, GA
, 30063-0001
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5340-00-301-3089
What is the NIIN of the NSN 5340-00-301-3089?
The National Item Identification Number (NIIN) of the NSN 5340-00-301-3089 is 00-301-3089
When the NSN 5340-00-301-3089 was assigned to the Federal Catalog?
It was assigned 51 years ago, on Sun, Oct 14, 1973
Does the NSN 5340-00-301-3089 contain any precious metals?
Does not contain precious metal
Does the NSN 5340-00-301-3089 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.