Rod End Clevis
1284830-101
(NSN) National Stock Number
5340-00-311-8222
Federal Supply Classification
5340 Commercial Hardware
Item Name Code
03796
Schedule B Code
-
Summary
0.2495 inches minimum and 0.2505 inches maximum hole diameter, 0.250 inches minimum and 0.260 inches maximum end radius, 0.720 inches nominal overall diameter, 0.300 inches minimum and 0.310 inches maximum fork span width, 0.500 inches minimum and 0.502 inches maximum rod connection bore diameter, 0.2605 inches minimum and 0.2615 inches maximum securing pin hole diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | KE |
Identification
A forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also yoke, universal joint and connector, rod end. For items specifically designed for aviation, see clevis, rod end, aviation.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 03796 | A264A0 | - | 2 |
Specifications
Hole Diameter
0.2495 inches minimum and 0.2505 inches maximum
Details
The length of a straight line which passes through the center of a hole,and terminates at the circumference.End Radius
0.250 inches minimum and 0.260 inches maximum
Details
A measurement of a straight line extending from the center of a circle to the end.Overall Diameter
0.720 inches nominal
Details
A measurement of the longest straight line across a circular cross-sectional plane.Fork Span Width
0.300 inches minimum and 0.310 inches maximum
Details
The distance laterally from tip to tip of the fork.Rod Connection Bore Diameter
0.500 inches minimum and 0.502 inches maximum
Details
The length of a straight line which passes through the center of a rod connection bore,and terminates at the circumference.Securing Pin Hole Diameter
0.2605 inches minimum and 0.2615 inches maximum
Details
The length of a straight line which passes through the center of a securing pin hole,and terminates at the circumference.Rod Connection Bore Depth
2.300 inches nominal
Details
The distance measured along a straight line parallel to the longitudinal axis which establishes the acceptable depth of the rod connection bore.Distance From Center Of Securing Pin Hole To Rod End
0.320 inches minimum and 0.330 inches maximum
Details
The distance along a straight line from the rod connecting end at right angle to the geometric axis of the securing pin hole center.Distance From Pivot Pinhole Center To Rod Connection End
3.100 inches nominal
Details
None.Fork Arm Thickness
0.120 inches nominal
Details
None.Fork Depth
0.500 inches nominal
Details
The measurement between specified points of the fork,in distinction from height.Criticality Code Justification
akye and aaub
Details
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.Material
aluminum alloy overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
qq-a-225/9,t7351 fed spec single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
anodize overall and paint overall or primer overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
mil-a-8625,type 1,class 1 mil spec single treatment response overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Style Designator
clevis
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 49240 | - | U | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
LOCKHEED MARTIN CORP DIV LOCKHEED MARTIN AERONAUTICS COMPANY
CAGE: 98897
MARIETTA
, GA
, 30063-0001
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5340-00-311-8222
What is the NIIN of the NSN 5340-00-311-8222?
The National Item Identification Number (NIIN) of the NSN 5340-00-311-8222 is 00-311-8222
When the NSN 5340-00-311-8222 was assigned to the Federal Catalog?
It was assigned 51 years ago, on Fri, Nov 2, 1973
Does the NSN 5340-00-311-8222 contain any precious metals?
Does not contain precious metal
Does the NSN 5340-00-311-8222 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.