Dust and Moisture Seal Boot
752-7068502-67
(NSN) National Stock Number
5340-01-498-0686
Federal Supply Classification
5340 Commercial Hardware
Item Name Code
19302
Schedule B Code
-
Summary
Fuel resistant and oil resistant and ozone resistant hazardous locations/environmental protection, 0.130 inches nominal radius, 4.000 inches nominal overall length, 2.002 inches nominal center to center distance between mounting facilities parallel to length, 2.000 inches nominal center to center distance between mounting facilities parallel to width, 0.870 inches nominal overall height
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| A | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | ZZ |
Identification
A flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes:bellows, protection; grommet, nonmetallic; and cable nipple, electrical. See also cap, electrical; cap, protective, dust and moisture seal; and shield, electrical connector.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 19302 | A02000 | - | 2 |
Specifications
Hazardous Locations/Environmental Protection
fuel resistant and oil resistant and ozone resistant
Details
The specific commercial rating which classes the item as to what degree the item will withstand environmental elements and/or hazardous locations.Radius
0.130 inches nominal
Details
The distance from the centerline to the axis of the item.Overall Length
4.000 inches nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Center To Center Distance Between Mounting Facilities Parallel To Length
2.002 inches nominal
Details
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the length.Center To Center Distance Between Mounting Facilities Parallel To Width
2.000 inches nominal
Details
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the width.Overall Height
0.870 inches nominal
Details
The distance measured in a straight line from the bottom to the top of an item.Overall Width
2.500 inches nominal
Details
An overall measurement taken at right angles to the length of an item,in distinction from thickness.Material Thickness
0.063 inches nominal
Details
A measurement of the smallest dimension of the material,in distinction from length or width.Mounting Hole Diameter
0.281 inches nominal
Details
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.Mounting Device Quantity
5
Details
The number of mounting devices used as a means of attaching the item.Base Width
1.050 inches nominal
Details
A measurement taken at right angles to the length of the base,in distinction from thickness.End Item Identification
los angeles class ssn(688); lifting mechanism
Details
The national stock number or the identification information of the end equipment for which the item is a part.Mounting Method
screw
Details
The means of attaching the item.Base Overall Length
1.850 inches nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the base.First Distance From Mounting Hole Center To Base Edge
0.250 inches nominal
Details
None.Distance From Inside Opening To Base Edge
0.674 inches nominal
Details
None.Second Distance From Mounting Hole Center To Base Edge
0.380 inches nominal
Details
None.Part Name Assigned By Controlling Agency
molded dust boot
Details
The name assigned to the item by the government agency or commercial organization controlling the design of the item.Material
rubber synthetic body
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
mil-r-6855, cl 1, ty b, gr 30 mil spec single material response body
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Style Designator
thru-hole
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| H832-1684-67 | 96169 | A | - | 3 | 2 | - | ZZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | U | A | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 95100 | - | S | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 846 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
FAQs
Frequently asked questions for NSN 5340-01-498-0686
What is the NIIN of the NSN 5340-01-498-0686?
The National Item Identification Number (NIIN) of the NSN 5340-01-498-0686 is 01-498-0686
When the NSN 5340-01-498-0686 was assigned to the Federal Catalog?
It was assigned 22 years ago, on Thu, Jun 13, 2002
Does the NSN 5340-01-498-0686 contain any precious metals?
Type/content is unknown
Does the NSN 5340-01-498-0686 contain any hazardous material?
No information in HMIRS
What is the ESD classification of NSN 5340-01-498-0686?
No known electrostatic discharge
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products