Dust and Moisture Seal Boot
1825615-1
(NSN) National Stock Number
5340-01-621-3016
Federal Supply Classification
5340 Commercial Hardware
Item Name Code
19302
Schedule B Code
-
Summary
2b thread class, right-hand thread direction, 0.28 inches nominal overall height, 0.06 inches nominal material thickness, 0.330 inches nominal width across flats, 0.120 inches nominal opening inside diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | ZZ |
Identification
A flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes:bellows, protection; grommet, nonmetallic; and cable nipple, electrical. See also cap, electrical; cap, protective, dust and moisture seal; and shield, electrical connector.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 19302 | A02000 | - | 2 |
Specifications
Thread Class
2b
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Overall Height
0.28 inches nominal
Details
The distance measured in a straight line from the bottom to the top of an item.Material Thickness
0.06 inches nominal
Details
A measurement of the smallest dimension of the material,in distinction from length or width.Width Across Flats
0.330 inches nominal
Details
The shortest straight line between flats,perpendicular to the height.Opening Inside Diameter
0.120 inches nominal
Details
The length of a straight line which passes through the center of the two surfaces of a circular opening,and terminates at the inside circumference.Thread Series
uns
Details
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.Thread Quantity Per Inch
48
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Nominal Thread Size
0.1900 inches
Details
A designation that is used for the purpose of general identification of the thread.Base Thread Location
internal
Details
Indicates the location of the thread on the base.Part Name Assigned By Controlling Agency
10-48 pushbutton boot seal
Details
The name assigned to the item by the government agency or commercial organization controlling the design of the item.Special Features
color is black;components must comply with the european directive 2002/95/ec on restriction of the use of certain hazardous substances in electrical and electronic equipement (rohs directive)
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Material
copper alloy body
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
rubber silicone insulator
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Surface Treatment
oxide body
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
mil-f-495 mil spec single treatment response body
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Style Designator
thru-hole
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 1825615 | 00779 | 1 | - | D | 9 | - | ZZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | A | A | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 95100 | - | S | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 846 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
FAQs
Frequently asked questions for NSN 5340-01-621-3016
What is the NIIN of the NSN 5340-01-621-3016?
The National Item Identification Number (NIIN) of the NSN 5340-01-621-3016 is 01-621-3016
When the NSN 5340-01-621-3016 was assigned to the Federal Catalog?
It was assigned 11 years ago, on Fri, Aug 30, 2013
Does the NSN 5340-01-621-3016 contain any precious metals?
Does not contain precious metal
Does the NSN 5340-01-621-3016 contain any hazardous material?
No information in HMIRS
What is the ESD classification of NSN 5340-01-621-3016?
No known electrostatic discharge
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products