Dust and Moisture Seal Boot
114R6055-17
(NSN) National Stock Number
5340-00-055-2914
Federal Supply Classification
5340 Commercial Hardware
Item Name Code
19302
Schedule B Code
-
Summary
Waterproof hazardous locations/environmental protection, 16.070 inches nominal overall height, 0.250 inches nominal mounting hole diameter, 8 mounting device quantity, mechanical sealing method, 9.750 inches nominal base outside diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | ZR |
Identification
A flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes:bellows, protection; grommet, nonmetallic; and cable nipple, electrical. See also cap, electrical; cap, protective, dust and moisture seal; and shield, electrical connector.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 19302 | A02000 | - | 2 |
Specifications
Hazardous Locations/Environmental Protection
waterproof
Details
The specific commercial rating which classes the item as to what degree the item will withstand environmental elements and/or hazardous locations.Overall Height
16.070 inches nominal
Details
The distance measured in a straight line from the bottom to the top of an item.Mounting Hole Diameter
0.250 inches nominal
Details
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.Mounting Device Quantity
8
Details
The number of mounting devices used as a means of attaching the item.Sealing Method
mechanical
Details
The means by which the item is sealed.Base Outside Diameter
9.750 inches nominal
Details
The length of a straight line which passes through the center of a base,and terminates at the outside circumference.Mounting Method
unthreaded hole
Details
The means of attaching the item.Opening Inside Diameter
0.880 inches nominal
Details
The length of a straight line which passes through the center of the two surfaces of a circular opening,and terminates at the inside circumference.Material
cotton body
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
mil-c-19002,type 1 mil spec single material response body
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Test Data Document
77272-114r6055 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Fsc Application Data
head,rotary wing
Details
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 114R6055-17 | 9J595 | 1 | - | 5 | 2 | - | ZZ |
| 114R6055-1 | 77272 | 1 | - | 5 | 9 | - | CT |
| 114R6055-17 | 77272 | 1 | - | 3 | 2 | - | CT |
| 114R6055-17 | 15815 | 1 | - | 5 | 9 | - | ZZ |
| 114R6055-1 | 81205 | 1 | - | 5 | 2 | - | CT |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 95100 | - | S | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 846 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
LEONARDO SPA HELICOPTERS DIVISION - PRODUCTION SITE
CAGE: A0126
SAMARATE
, VA
, 21017
ITALY
View Products
FAQs
Frequently asked questions for NSN 5340-00-055-2914
What is the NIIN of the NSN 5340-00-055-2914?
The National Item Identification Number (NIIN) of the NSN 5340-00-055-2914 is 00-055-2914
When the NSN 5340-00-055-2914 was assigned to the Federal Catalog?
It was assigned 61 years ago, on Tue, Jan 1, 1963
Does the NSN 5340-00-055-2914 contain any precious metals?
Type/content is unknown
Does the NSN 5340-00-055-2914 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products