Machine Thread Bushing
2733740
(NSN) National Stock Number
5365-01-020-5070
Federal Supply Classification
5365 Bushings, Rings, Shims and Spacers
Item Name Code
18019
Schedule B Code
-
Summary
Right-hand thread direction, 45.0 countersink angle in deg, 0.110 inches minimum and 0.140 inches maximum slot depth, 0.250 inches nominal slot width, 0.610 inches minimum overall length, 1.500 inches nominal diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 1 | - | - | ZZ |
Identification
A straight nonfluid fitting with wrenching facilities on one end and external threads, other than pipe or hose series, on the other end. It has an unthreaded through hole in its axis which may be countersunk and/or counterbored on one or both ends. It is designed to accommodate a shaft, or the like, or used to reinforce a hole in a bulkhead, or the like. For similar items specifically designed for use in a stuffing box, see packing nut. For nonfluid items with an internal thread, see insert, screw thread; or adapter bushing. Excludes:reducer, boss; and items designed to accommodate a tube or tube fitting.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 18019 | A540S0 | - | 1 |
Specifications
Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Countersink Angle In Deg
45.0
Details
The included angle of the countersink,expressed in degrees.Slot Depth
0.110 inches minimum and 0.140 inches maximum
Details
The measurement between specified points of the slot,in distinction from height.Slot Width
0.250 inches nominal
Details
The distance,measured along a straight line perpendicular to the longitudinal axis of the slot,from one edge to the other.Overall Length
0.610 inches minimum
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Diameter
1.500 inches nominal
Details
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.Wrenching Facility Shape
face spanner
Details
The physical configuration of the facility utilized to assemble or disassemble the item.Countersink Depth
0.050 inches nominal
Details
The measurement of the process used to enlarge part of a hole,in distinction from height.Screw Thread Length
0.470 inches nominal
Details
A measurement of the extent of screw threads,including incomplete screw threads,along a line parallel to the longitudinal thread axis.Countersink Location
threaded end
Details
Indicates the location of the countersink on the item.Hole Inside Diameter
1.151 inches minimum and 1.161 inches maximum
Details
The length of a straight line which passes through the center of the hole,and terminates at the inside circumference.Features Provided
countersunk
Details
Those features,not otherwise specified,which may be required for proper functioning of the item.Thread Quantity Per Inch
12
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Nominal Thread Size
1.625 inches
Details
A designation that is used for the purpose of general identification of the thread.Material
aluminum alloy 7075
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
qq-a-225/9, t7351 fed spec single material response
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
anodize
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
mil-a-8625 mil spec single treatment response
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Thread Series Designator
unj
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 2733740 | 82106 | 5 | - | 3 | 2 | - | ZZ |
| 2733740 | 92003 | 5 | - | 5 | 9 | - | ZZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 58860 | - | Q | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
PARKER-HANNIFIN CORPORATION DIV CUSTOMER SUPPORT OPERATIONS
CAGE: 59211
IRVINE
, CA
, 92618-1814
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5365-01-020-5070
What is the NIIN of the NSN 5365-01-020-5070?
The National Item Identification Number (NIIN) of the NSN 5365-01-020-5070 is 01-020-5070
When the NSN 5365-01-020-5070 was assigned to the Federal Catalog?
It was assigned 48 years ago, on Fri, Apr 30, 1976
Does the NSN 5365-01-020-5070 contain any precious metals?
Type/content is unknown
Does the NSN 5365-01-020-5070 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products