Machine Bolt
4J13360-113A
(NSN) National Stock Number
5306-00-143-2574
Federal Supply Classification
5306 Bolts
Item Name Code
01847
Schedule B Code
7318152000
Summary
3a thread class, right-hand thread direction, 0.529 inches minimum thread length, 4.260 inches nominal fastener length, hexagon head style, 0.250 inches nominal head height
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 2 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | SE |
Identification
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 01847 | A003B0 | - | 1 |
Specifications
Thread Class
3a
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Length
0.529 inches minimum
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Fastener Length
4.260 inches nominal
Details
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.Head Style
hexagon
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.Head Height
0.250 inches nominal
Details
A measurement from the bottom to the top of the head,in distinction from depth.Width Between Flats
0.928 inches minimum and 0.940 inches maximum
Details
None.Shank Unthreaded Hole Diameter
0.139 inches minimum first hole and 0.145 inches maximum first hole
Details
The length of a straight line which passes through the center of the shank unthreaded hole,and terminates at the inside circumference.Nominal Thread Diameter
0.625 inches
Details
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.Grip Length
3.620 inches nominal
Details
A measurement of the longest dimension of the grip,in distinction from width.Features Provided
finished head
Details
Those features,not otherwise specified,which may be required for proper functioning of the item.Thread Quantity Per Inch
18
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Minimum Tensile Strength
280000 pounds per square inch
Details
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.Distance From Head Largest Bearing Surface To Shank Hole Center
4.130 inches nominal first hole
Details
The distance from the shank hole centerline to the largest bearing surface of the head.Surface Finish
125.0 microinches head
Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Surface Finish
125.0 microinches threads
Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Surface Finish
32.0 microinches grip
Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Material
steel comp h11 overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
ams 6487 assn std single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Thread Series Designator
unjf
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 48950 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 573 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
LOCKHEED MARTIN CORP DIV LOCKHEED MARTIN AERONAUTICS COMPANY
CAGE: 98897
MARIETTA
, GA
, 30063-0001
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5306-00-143-2574
What is the NIIN of the NSN 5306-00-143-2574?
The National Item Identification Number (NIIN) of the NSN 5306-00-143-2574 is 00-143-2574
When the NSN 5306-00-143-2574 was assigned to the Federal Catalog?
It was assigned 56 years ago, on Fri, Oct 11, 1968
Does the NSN 5306-00-143-2574 contain any precious metals?
Does not contain precious metal
Does the NSN 5306-00-143-2574 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.