Internally Relieved Body Bolt
1202648-101
(NSN) National Stock Number
5306-00-273-2546
Federal Supply Classification
5306 Bolts
Item Name Code
06676
Schedule B Code
7318152000
Summary
3a thread class, right-hand thread direction, 0.358 inches minimum and 0.403 inches maximum thread length, 4.451 inches minimum and 4.466 inches maximum fastener length, round w/wrench flats head style, 0.766 inches nominal head diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | ZZ |
Identification
An externally threaded fastener whose external threaded portion is of one nominal diameter. It has a concentric hole along the longitudinal centerline which may extend a part or the full length of the bolt. The concentric hole along the centerline may be counterbored and/or internally threaded at the head end or the bolt end. The head is designed to be held or driven by an external and/or internal driver. For items having a hole(s) perpendicular to the axis which meet the concentric hole along the longitudinal centerline, see bolt, fluid passage.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 06676 | A003B0 | - | 1 |
Specifications
Thread Class
3a
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Length
0.358 inches minimum and 0.403 inches maximum
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Fastener Length
4.451 inches minimum and 4.466 inches maximum
Details
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.Head Style
round w/wrench flats
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.Head Diameter
0.766 inches nominal
Details
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.Head Height
0.065 inches minimum and 0.080 inches maximum
Details
A measurement from the bottom to the top of the head,in distinction from depth.Width Between Flats
0.688 inches nominal
Details
None.Shank Unthreaded Hole Diameter
0.076 inches minimum and 0.086 inches maximum first hole
Details
The length of a straight line which passes through the center of the shank unthreaded hole,and terminates at the inside circumference.Concentric Hole Depth
3.670 inches minimum and 3.685 inches maximum
Details
None.Concentric Hole Diameter
0.483 inches minimum and 0.490 inches maximum
Details
None.Nominal Thread Diameter
0.250 inches
Details
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.Thread Quantity Per Inch
28
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Minimum Tensile Strength
135000 pounds per square inch
Details
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.Distance From Head Largest Bearing Surface To Shank Hole Center
4.312 inches nominal first hole
Details
The distance from the shank hole centerline to the largest bearing surface of the head.Part Name Assigned By Controlling Agency
navy special project
Details
The name assigned to the item by the government agency or commercial organization controlling the design of the item.Material
steel comp 630 overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
ams 5643 assn std single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Style Designator
concentric hole unthreaded
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Thread Series Designator
unf
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | A | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 48950 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 573 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
LOCKHEED MARTIN CORP DIV LOCKHEED MARTIN AERONAUTICS COMPANY
CAGE: 98897
MARIETTA
, GA
, 30063-0001
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5306-00-273-2546
What is the NIIN of the NSN 5306-00-273-2546?
The National Item Identification Number (NIIN) of the NSN 5306-00-273-2546 is 00-273-2546
When the NSN 5306-00-273-2546 was assigned to the Federal Catalog?
It was assigned 51 years ago, on Mon, Jul 30, 1973
Does the NSN 5306-00-273-2546 contain any precious metals?
Does not contain precious metal
Does the NSN 5306-00-273-2546 contain any hazardous material?
No data in HMIRS
What is the ESD classification of NSN 5306-00-273-2546?
No known electrostatic discharge
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.