Eye Bolt
204-001-768-1
(NSN) National Stock Number
5306-00-604-3169
Federal Supply Classification
5306 Bolts
Item Name Code
01853
Schedule B Code
7318152000
Summary
3a thread class, right-hand thread direction, 0.835 inches minimum and 0.855 inches maximum thread length, 0.250 inches minimum and 0.251 inches maximum eye inside diameter, 1.390 inches minimum and 1.420 inches maximum shank length, 0.372 inches minimum and 0.376 inches maximum eye stock thickness
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | C |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 1 | 9X | - | ZZ |
Identification
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also bolt, hook. Excludes:connector, rod end.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 01853 | A003B0 | - | 1 |
Specifications
Thread Class
3a
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Length
0.835 inches minimum and 0.855 inches maximum
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Eye Inside Diameter
0.250 inches minimum and 0.251 inches maximum
Details
The length of a straight line which passes through the center of the eye and terminates at the inner periphery.Shank Length
1.390 inches minimum and 1.420 inches maximum
Details
A measurement of the longest dimension of the shank,in distinction from width.Eye Stock Thickness
0.372 inches minimum and 0.376 inches maximum
Details
None.Overall Length
1.485 inches minimum and 1.515 inches maximum
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Nominal Thread Diameter
0.375 inches
Details
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.Thread Quantity Per Inch
16
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Minimum Tensile Strength
150000 pounds per square inch
Details
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.Distance From Center Of Eye To Shank End
1.250 inches nominal
Details
None.Eye Outside Width
0.480 inches minimum and 0.520 inches maximum
Details
None.Special Features
shank is undercut at eye 0.145 in. min,0.165 in. max w,0.285 in. min,0.288 in. max dia,eye is drilled through long cross sect.,0.094 in. min,0.097 in. max
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Material
steel overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
mil-s-5626,physical cond c,surface cond 4 mil spec single material response or mil-s-6758,physical cond c,surface cond 4 mil spec single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
cadmium overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
qq-p-416,type 1,class 1 fed spec single treatment response overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Thread Series Designator
unc
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 204-001-768-1 | 80070 | X | - | 5 | 9 | - | XX |
| 204-001-768-001 | 97499 | 5 | - | 5 | 2 | - | 9Z |
| 204-001-768-1 | 97499 | 1 | - | 3 | 2 | - | CT |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 48950 | - | W | U |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
FAQs
Frequently asked questions for NSN 5306-00-604-3169
What is the NIIN of the NSN 5306-00-604-3169?
The National Item Identification Number (NIIN) of the NSN 5306-00-604-3169 is 00-604-3169
When the NSN 5306-00-604-3169 was assigned to the Federal Catalog?
It was assigned 61 years ago, on Tue, Jan 1, 1963
Does the NSN 5306-00-604-3169 contain any precious metals?
Type/content is unknown
Does the NSN 5306-00-604-3169 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products