Externally Relieved Body Bolt
8166270
(NSN) National Stock Number
5306-00-535-3611
Federal Supply Classification
5306 Bolts
Item Name Code
06675
Schedule B Code
7318152000
Summary
2a thread class, right-hand thread direction, 1.375 inches minimum thread length, 35.500 inches minimum fastener length, hexagon head style, 0.219 inches minimum head height
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| X | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | XX |
Identification
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes:undercuts for thread relief). It is no. 10 (0.190 in.) (5 mm) or larger in size and has a head which is not designed to be held or driven with an inserted driver or designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Excludes:bolt, internal wrenching and thumbscrew. See also screw, externally relieved body.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 06675 | A003B0 | - | 1 |
Specifications
Thread Class
2a
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Length
1.375 inches minimum
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Fastener Length
35.500 inches minimum
Details
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.Head Style
hexagon
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.Head Height
0.219 inches minimum
Details
A measurement from the bottom to the top of the head,in distinction from depth.Width Between Flats
0.562 inches minimum
Details
None.First Diameter From Head
0.364 inches minimum
Details
None.Second Diameter From Head
0.312 inches minimum
Details
None.Distance From Largest Bearing Surface Of Head To End Of First Diameter
0.500 inches minimum
Details
None.Distance From Largest Bearing Surface Of Head To End Of Second Diameter
34.125 inches minimum
Details
None.Nominal Thread Diameter
0.375 inches
Details
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.Thread Quantity Per Inch
24
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Minimum Tensile Strength
160000 pounds per square inch
Details
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.Hardness Rating
23.0 rockwell c maximum overall
Details
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.Externally Relieved Body Diameter Quantity
2
Details
The number of externally relieved diameters on the body,adjacent to the head.Material
steel comp 4130 overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
mil-s-6758 mil spec single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
cadmium overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
qq-p-416,ty 1,cl 2 fed spec single treatment response overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Thread Series Designator
unf
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 48950 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 573 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
US ARMY AVIATION AND MISSILE COMMAND
CAGE: 18876
REDSTONE CENTRAL
, AL
, 35898-5000
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5306-00-535-3611
What is the NIIN of the NSN 5306-00-535-3611?
The National Item Identification Number (NIIN) of the NSN 5306-00-535-3611 is 00-535-3611
When the NSN 5306-00-535-3611 was assigned to the Federal Catalog?
It was assigned 61 years ago, on Tue, Jan 1, 1963
Does the NSN 5306-00-535-3611 contain any precious metals?
Does not contain precious metal
Does the NSN 5306-00-535-3611 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.