Externally Relieved Body Bolt
6784358
(NSN) National Stock Number
5306-00-559-0534
Federal Supply Classification
5306 Bolts
Item Name Code
06675
Schedule B Code
7318152000
Summary
3a thread class, right-hand thread direction, 0.781 inches minimum thread length, 5.156 inches nominal fastener length, hexagon head style, 0.344 inches nominal head height
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| X | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | XX |
Identification
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes:undercuts for thread relief). It is no. 10 (0.190 in.) (5 mm) or larger in size and has a head which is not designed to be held or driven with an inserted driver or designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Excludes:bolt, internal wrenching and thumbscrew. See also screw, externally relieved body.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 06675 | A003B0 | - | 1 |
Specifications
Thread Class
3a
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Length
0.781 inches minimum
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Fastener Length
5.156 inches nominal
Details
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.Head Style
hexagon
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.Head Height
0.344 inches nominal
Details
A measurement from the bottom to the top of the head,in distinction from depth.Width Between Flats
0.934 inches nominal
Details
None.Hole Diameter
0.070 inches nominal
Details
The length of a straight line which passes through the center of a hole,and terminates at the circumference.Shank Unthreaded Hole Diameter
0.131 inches nominal first hole
Details
The length of a straight line which passes through the center of the shank unthreaded hole,and terminates at the inside circumference.First Diameter From Head
0.635 inches nominal
Details
None.Second Diameter From Head
0.500 inches nominal
Details
None.Third Diameter From Head
0.635 inches nominal
Details
None.Fourth Diameter From Head
0.500 inches nominal
Details
None.Distance From Largest Bearing Surface Of Head To End Of First Diameter
0.625 inches nominal
Details
None.Distance From Largest Bearing Surface Of Head To End Of Second Diameter
2.719 inches nominal
Details
None.Distance From Largest Bearing Surface Of Head To End Of Third Diameter
3.094 inches nominal
Details
None.Distance From Largest Bearing Surface Of Head To End Of Fourth Diameter
4.375 inches nominal
Details
None.Nominal Thread Diameter
0.625 inches
Details
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.Hole Quantity
3
Details
The number of holes provided.Hole Type
drilled
Details
Indicates the type of hole(s) provided in the item.Thread Quantity Per Inch
18
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Minimum Tensile Strength
142000 pounds per square inch
Details
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.Hardness Rating
32.0 rockwell c minimum overall and 36.0 rockwell c maximum overall
Details
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.Hole Configuration Style
hexagon flats
Details
The style designation that most nearly corresponds to the appearance of the hole configuration.Distance From Head Largest Bearing Surface To Shank Hole Center
4.891 inches nominal first hole
Details
The distance from the shank hole centerline to the largest bearing surface of the head.Externally Relieved Body Diameter Quantity
4
Details
The number of externally relieved diameters on the body,adjacent to the head.Material
steel comp 4340 overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Thread Series Designator
unf
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 6784358 | 24617 | X | - | 5 | 2 | - | XX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 48950 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 573 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
FAQs
Frequently asked questions for NSN 5306-00-559-0534
What is the NIIN of the NSN 5306-00-559-0534?
The National Item Identification Number (NIIN) of the NSN 5306-00-559-0534 is 00-559-0534
When the NSN 5306-00-559-0534 was assigned to the Federal Catalog?
It was assigned 61 years ago, on Tue, Jan 1, 1963
Does the NSN 5306-00-559-0534 contain any precious metals?
Type/content is unknown
Does the NSN 5306-00-559-0534 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products