Externally Relieved Body Bolt
611967
(NSN) National Stock Number
5306-00-459-4544
Federal Supply Classification
5306 Bolts
Item Name Code
06675
Schedule B Code
7508900000
Summary
1a thread class, right-hand thread direction, 0.488 inches minimum and 0.548 inches maximum thread length, 0.910 inches minimum and 0.930 inches maximum fastener length, dee chamfer head style, 0.490 inches minimum and 0.510 inches maximum head diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | KE |
Identification
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes:undercuts for thread relief). It is no. 10 (0.190 in.) (5 mm) or larger in size and has a head which is not designed to be held or driven with an inserted driver or designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Excludes:bolt, internal wrenching and thumbscrew. See also screw, externally relieved body.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 06675 | A003B0 | - | 1 |
Specifications
Thread Class
1a
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Length
0.488 inches minimum and 0.548 inches maximum
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Fastener Length
0.910 inches minimum and 0.930 inches maximum
Details
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.Head Style
dee chamfer
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.Head Diameter
0.490 inches minimum and 0.510 inches maximum
Details
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.Head Height
0.170 inches minimum and 0.190 inches maximum
Details
A measurement from the bottom to the top of the head,in distinction from depth.Distance From Centerline To Flat
0.118 inches minimum and 0.123 inches maximum
Details
None.First Diameter From Head
0.197 inches nominal
Details
None.Second Diameter From Head
0.270 inches minimum and 0.272 inches maximum
Details
None.Third Diameter From Head
0.175 inches minimum and 0.195 inches maximum
Details
None.Fourth Diameter From Head
0.270 inches minimum and 0.272 inches maximum
Details
None.Distance From Largest Bearing Surface Of Head To End Of First Diameter
0.010 inches minimum and 0.060 inches maximum
Details
None.Distance From Largest Bearing Surface Of Head To End Of Second Diameter
0.078 inches minimum and 0.088 inches maximum
Details
None.Distance From Largest Bearing Surface Of Head To End Of Third Diameter
0.218 inches minimum and 0.248 inches maximum
Details
None.Distance From Largest Bearing Surface Of Head To End Of Fourth Diameter
0.330 inches minimum and 0.350 inches maximum
Details
None.Nominal Thread Diameter
0.250 inches
Details
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.Thread Quantity Per Inch
28
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Externally Relieved Body Diameter Quantity
4
Details
The number of externally relieved diameters on the body,adjacent to the head.Special Features
flat surface of dee head extends into shank 0.030 in. min,0.080 in. max
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Material
nickel alloy overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
ams 5708 assn std single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Thread Series Designator
unf
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 611967 | 92215 | 5 | - | 5 | 2 | - | KZ |
| 611967 | 56878 | 5 | - | 5 | 2 | - | KZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 48950 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 573 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY
CAGE: 77445
EAST HARTFORD
, CT
, 06118-3811
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5306-00-459-4544
What is the NIIN of the NSN 5306-00-459-4544?
The National Item Identification Number (NIIN) of the NSN 5306-00-459-4544 is 00-459-4544
When the NSN 5306-00-459-4544 was assigned to the Federal Catalog?
It was assigned 54 years ago, on Wed, Aug 19, 1970
Does the NSN 5306-00-459-4544 contain any precious metals?
Type/content is unknown
Does the NSN 5306-00-459-4544 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products