Externally Relieved Body Bolt
576411-1
(NSN) National Stock Number
5306-01-419-8435
Federal Supply Classification
5306 Bolts
Item Name Code
06675
Schedule B Code
7318152000
Summary
2a thread class, right-hand thread direction, 0.688 inches nominal thread length, 2.188 inches nominal fastener length, hexagon head style, 0.387 inches minimum and 0.403 inches maximum head height
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| A | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 1 | - | - | ZZ |
Identification
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes:undercuts for thread relief). It is no. 10 (0.190 in.) (5 mm) or larger in size and has a head which is not designed to be held or driven with an inserted driver or designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Excludes:bolt, internal wrenching and thumbscrew. See also screw, externally relieved body.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 06675 | A003B0 | - | 1 |
Specifications
Thread Class
2a
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Length
0.688 inches nominal
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Fastener Length
2.188 inches nominal
Details
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.Head Style
hexagon
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.Head Height
0.387 inches minimum and 0.403 inches maximum
Details
A measurement from the bottom to the top of the head,in distinction from depth.Width Between Flats
1.051 inches minimum and 1.083 inches maximum
Details
None.First Diameter From Head
0.400 inches nominal
Details
None.Nominal Thread Diameter
0.625 inches
Details
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.Thread Quantity Per Inch
11
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Criticality Code Justification
zzzy
Details
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.Externally Relieved Body Diameter Quantity
1
Details
The number of externally relieved diameters on the body,adjacent to the head.Material
steel comp 303 overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
astm a582 assn std single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
passivate overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Special Test Features
special quality control testing
Details
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.Test Data Document
81349-mil-p-23199 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Thread Series Designator
unc
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Departure From Cited Document
as modified by material
Details
The technical differentiating characteristic/s/ of an item of supply which depart/s/ from the text of a specification or a standard in that it represents a selection of characteristics stated in the specification or standard as being optional,or a variation from one or more of the stated characteristics,or an additional characteristic not stated in the specification or standard.Reference Number Differentiating Characteristics
as differentiated by material which must conform to ships parts control center special quality control provisions
Details
A feature of the item of supply which must be specifically recorded when the reference number covers a range of items.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| LL-NU0-0641 | 14153 | 9 | - | 5 | 9 | - | ZZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 48950 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 574 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
FAQs
Frequently asked questions for NSN 5306-01-419-8435
What is the NIIN of the NSN 5306-01-419-8435?
The National Item Identification Number (NIIN) of the NSN 5306-01-419-8435 is 01-419-8435
When the NSN 5306-01-419-8435 was assigned to the Federal Catalog?
It was assigned 29 years ago, on Sat, Sep 30, 1995
Does the NSN 5306-01-419-8435 contain any precious metals?
Does not contain precious metal
Does the NSN 5306-01-419-8435 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products