Externally Relieved Body Bolt
11619278
(NSN) National Stock Number
5306-00-419-9483
Federal Supply Classification
5306 Bolts
Item Name Code
06675
Schedule B Code
7318152000
Summary
2a thread class, right-hand thread direction, 1.445 inches maximum thread length, 1.695 inches nominal fastener length, flat chamfer head style, 0.500 inches nominal head diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | ZZ |
Identification
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes:undercuts for thread relief). It is no. 10 (0.190 in.) (5 mm) or larger in size and has a head which is not designed to be held or driven with an inserted driver or designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Excludes:bolt, internal wrenching and thumbscrew. See also screw, externally relieved body.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 06675 | A003B0 | - | 1 |
Specifications
Thread Class
2a
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Length
1.445 inches maximum
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Fastener Length
1.695 inches nominal
Details
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.Head Style
flat chamfer
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.Head Diameter
0.500 inches nominal
Details
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.Head Height
0.115 inches minimum and 0.125 inches maximum
Details
A measurement from the bottom to the top of the head,in distinction from depth.Shank Unthreaded Hole Diameter
0.125 inches minimum first hole and 0.129 inches maximum first hole
Details
The length of a straight line which passes through the center of the shank unthreaded hole,and terminates at the inside circumference.First Diameter From Head
0.312 inches nominal
Details
None.Distance From Largest Bearing Surface Of Head To End Of First Diameter
0.250 inches nominal
Details
None.Nominal Thread Diameter
0.375 inches
Details
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.Thread Quantity Per Inch
16
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Distance From Head Largest Bearing Surface To Shank Hole Center
1.383 inches nominal first hole
Details
The distance from the shank hole centerline to the largest bearing surface of the head.Externally Relieved Body Diameter Quantity
1
Details
The number of externally relieved diameters on the body,adjacent to the head.Special Features
shank end relieved 0.063 depth 0.680 lg.perpendicular to the drilled hole in shank
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Material
steel comp 1018 overall or steel comp 1035 overall or steel comp 1109 overall or steel comp 1137 overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Surface Treatment
cadmium overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Thread Series Designator
unc
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 5306004199483 | A00AM | 9 | - | 6 | 9 | - | YP |
| 5306004199483 | SCY13 | 9 | - | 5 | 9 | - | YP |
| 11619278 | 19204 | 1 | - | 5 | 9 | - | BF |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 48950 | - | W | U |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 573 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM
CAGE: 19207
WARREN
, MI
, 48397
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5306-00-419-9483
What is the NIIN of the NSN 5306-00-419-9483?
The National Item Identification Number (NIIN) of the NSN 5306-00-419-9483 is 00-419-9483
When the NSN 5306-00-419-9483 was assigned to the Federal Catalog?
It was assigned 53 years ago, on Wed, Dec 16, 1970
Does the NSN 5306-00-419-9483 contain any precious metals?
Does not contain precious metal
Does the NSN 5306-00-419-9483 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products