Assembled Washer Bolt
LD111-0059-2281
(NSN) National Stock Number
5306-01-218-0907
Federal Supply Classification
5306 Bolts
Item Name Code
06659
Schedule B Code
7318152000
Summary
3a thread class, right-hand thread direction, 0.514 inches minimum and 0.574 inches maximum thread length, 2.279 inches minimum and 2.307 inches maximum fastener length, hexagon head style, 0.140 inches minimum and 0.172 inches maximum head height
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | KZ |
Identification
A bolt, machine on which has been assembled one or more nonremovable washers. See also screw, assembled washer.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 06659 | A003B0 | - | 1 |
Specifications
Thread Class
3a
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Length
0.514 inches minimum and 0.574 inches maximum
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Fastener Length
2.279 inches minimum and 2.307 inches maximum
Details
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.Head Style
hexagon
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.Head Height
0.140 inches minimum and 0.172 inches maximum
Details
A measurement from the bottom to the top of the head,in distinction from depth.Width Between Flats
0.430 inches minimum and 0.439 inches maximum
Details
None.Washer Quantity
1
Details
The number of washers included on the item.Nominal Thread Diameter
0.250 inches
Details
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.Thread Quantity Per Inch
28
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Minimum Tensile Strength
140000 pounds per square inch
Details
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.Primary Washer Outside Diameter
0.480 inches nominal
Details
None.Primary Washer Style
flat
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the primary washer.Primary Washer Material Thickness
0.032 inches nominal
Details
None.Special Features
bolt furnished with tab and spacer; tab cres comp 301 per mil-s-5059; spacer cres type 303se per astm a582
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Material
iron alloy 660 fastener
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel comp 301 primary washer
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
ams5732 assn std single material response or ams5737 assn std single material response fastener
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
mil-s-5059 mil spec single material response primary washer
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
passivate overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
qq-p-35 fed spec single treatment response overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Thread Series Designator
unjf
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 13D0021-114 | 88277 | A | - | 5 | 2 | - | KZ |
| 13D0021-114 | 0F658 | 5 | - | 5 | 2 | - | ZZ |
| LD111-0059-0012 | 43999 | 5 | - | 5 | 2 | - | KZ |
| LD111-0059-0032 | 43999 | 5 | - | 5 | 2 | - | KZ |
| LD111-0059-0052 | 43999 | 5 | - | 5 | 2 | - | KZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 48950 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 573 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
THE BOEING COMPANY DIV LEGACY AM&M
CAGE: 43999
OKLAHOMA CITY
, OK
, 73135-5922
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5306-01-218-0907
What is the NIIN of the NSN 5306-01-218-0907?
The National Item Identification Number (NIIN) of the NSN 5306-01-218-0907 is 01-218-0907
When the NSN 5306-01-218-0907 was assigned to the Federal Catalog?
It was assigned 39 years ago, on Tue, Oct 8, 1985
Does the NSN 5306-01-218-0907 contain any precious metals?
Does not contain precious metal
Does the NSN 5306-01-218-0907 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products