Assembled Sleeve Bolt
586R821H01
(NSN) National Stock Number
5306-01-449-5503
Federal Supply Classification
5306 Bolts
Item Name Code
38893
Schedule B Code
7318152000
Summary
3a thread class, right-hand thread direction, 0.355 inches minimum and 0.395 inches maximum thread length, 1.637 inches minimum and 1.667 inches maximum fastener length, hexagon head style, 0.090 inches minimum and 0.120 inches maximum head height
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| A | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | ZZ |
Identification
A headed, externally tapered or straight fastener with a flanged outer sleeve ground externally straight. The head is designed to accommodate an external hand or power operated wrench or driver. The fastener must be tightened or released by torquing a nut.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 38893 | A003B0 | - | 1 |
Specifications
Thread Class
3a
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Length
0.355 inches minimum and 0.395 inches maximum
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Fastener Length
1.637 inches minimum and 1.667 inches maximum
Details
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.Head Style
hexagon
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.Head Height
0.090 inches minimum and 0.120 inches maximum
Details
A measurement from the bottom to the top of the head,in distinction from depth.Width Between Flats
0.305 inches minimum and 0.312 inches maximum
Details
None.Nominal Thread Diameter
0.190 inches
Details
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.Thread Quantity Per Inch
32
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Minimum Tensile Strength
175000 pounds per square inch
Details
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.Special Features
0.250-28unf-2a threads on shoulder; threaded hex sleeve 0.312 in. across flats
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Material
steel comp 301 secondary washer or steel comp 302 secondary washer or steel comp 316 secondary washer
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel comp xm-13 fastener
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel corrosion resisting primary washer
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel corrosion resisting spring
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel corrosion resisting stand-off
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
ams 5629 assn std single material response fastener
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
fed-s-std 66 fed std all material responses primary washer
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
fed-std 66 fed std all material responses secondary washer
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
qq-s-763, 300 series fed spec all material responses stand-off or ams 5640, 300 series assn std single material response stand-off or astm a582, 300 series assn std all material responses stand-off
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
passivate overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
qq-p-35 fed spec single treatment response overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Thread Series Designator
unf
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| FT1384-10-20 | 58794 | 5 | - | 5 | 2 | - | ZZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 48950 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 574 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
NORTHROP GRUMMAN SYSTEMS CORPORATION DIV NORTHROP GRUMMAN SYSTEMS CORPORATION ELECTRONIC SYSTEMS
CAGE: 97942
LINTHICUM HEIGHTS
, MD
, 21090-2202
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5306-01-449-5503
What is the NIIN of the NSN 5306-01-449-5503?
The National Item Identification Number (NIIN) of the NSN 5306-01-449-5503 is 01-449-5503
When the NSN 5306-01-449-5503 was assigned to the Federal Catalog?
It was assigned 27 years ago, on Mon, Oct 6, 1997
Does the NSN 5306-01-449-5503 contain any precious metals?
Does not contain precious metal
Does the NSN 5306-01-449-5503 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products